Printing photos from a memory card or USB Flash memory drive
39
5
eRepeat step d until you have entered
all the image numbers that you want to
print.
(For example, enter 1, OK, 3, OK, 6, OK
to print images No.1, No.3 and No.6.)
Note
You can enter up to 12 characters
(including commas) for the image
numbers you want to print.
fAfter you have chosen all the image
numbers, press OK again.
gPress + or - repeatedly to enter the
number of copies you want.
hDo one of the following:
Change the print settings. (See
page 45.)
If you do not want to change any
settings, press ColourStart to pr int.
Enhance Photos 5
You can edit and add effects to your photos
and view them on the LCD before printing.
Note
• After adding each effect, you can enlarge
the view of the image by pressing
Ink Management. To go back to the
original size, press Ink Management
again.
• The Enhance Photos feature is supported
by technology from Reallusion, Inc.
Auto Correct 5
Auto Correct is available for most photos. The
machine decides the suitable effect for your
photo.
aMake sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press (Photo Capture).
bPress a or b to choose
Enhance Photos.
Press OK.
cPress d or c to choose your photo.
Press OK.
dPress a or b to choose Auto Correct.
Press OK.
ePress OK. Then press + or - repeatedly
to enter the number of copies you want.
fDo one of the following.
Press OK and change the print
settings. (See page 45.)
If you do not want to change any
settings, press Colour Start to print.
Note
If Remove Red-Eye appears on the LCD,
press a to attempt to remove red-eye from
your photo.