
Configuration methods
d e
f When
g Activate
h
i
To cancel, press .
Do one of the following:
When your Brother machine is the G/O, it will wait for a connection request from your mobile device. When PIN Code appears, type the PIN displayed on your mobile device in to the machine. Press OK. Follow the instructions and go to step j.
If the PIN is displayed on your Brother machine, type the PIN to your mobile device.
When your Brother machine is not the G/O, it will display available device names with which to configure a
Do one of the following:
Press Display PIN Code to display the PIN on your machine and type the PIN in to your mobile device. Follow the instructions and then go to step j.
Press Input PIN Code to type a PIN shown by your mobile device in to the machine and then press OK. Follow the instructions and then go to step j.
If your mobile device does not display a PIN, press |
| on your Brother machine. Go back to step a |
and try again. |
|
|
j If your mobile device connects successfully, the machine displays the message Connected.
You have completed the
If the connection fails, see Troubleshooting on page 14.
Configuration using the PIN Method of WPSIf your mobile device supports the PIN Method of WPS
NOTE
When the machine receives the
a b
Press .
Press All Settings.
7