Brother DCP-J4110DW 16

Press Settings.

Configuration methods

f When Wi-Fi Direct On? is displayed, press On to accept. To cancel, press Off.

g When Activate Wi-Fi Direct on other device. Then Press [OK]. is displayed, activate	2
your mobile device’s WPS PIN configuration method (see your mobile device’s user’s guide for	2
instructions) and then press OK on your Brother machine. This will start the Wi-Fi Direct setup.

To cancel, press .

h The machine will wait for a connection request from your mobile device. When PIN Code appears, type the PIN displayed on your mobile device in to the machine.

Press OK.

i If your mobile device connects successfully, the machine displays the message Connected.

You have completed the Wi-Fi Direct network setup. For details on printing from or scanning to your mobile device, download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from the Brother Solutions Center (http://solutions.brother.com/).

If the connection fails, see Troubleshooting on page 14.

Manual configuration for a Wi-Fi Direct network

If your mobile device does not support Wi-Fi Direct or WPS, you must configure a Wi-Fi Direct network manually.

NOTE

When the machine receives the Wi-Fi Direct request from your mobile device, the message Received Wi-Fi Direct connection request. will be displayed. Press Connect to connect.

b Press s or t to choose Network.

c Press s or t to choose Wi-Fi Direct. d Press s or t to choose Manual.

e When Wi-Fi Direct On? is displayed, press On to accept. To cancel, press Off.

f The machine will show the SSID name and Password for two minutes. Go to the wireless network settings page of your mobile device and enter the SSID name and password.

g If your mobile device connects successfully, the machine displays the message Connected.

If the connection fails, see Troubleshooting on page 14.