Configuration methods

 

c Press Network.

 

d Press Wi-Fi Direct.

 

e Press Group Owner and then press On.

2

f Press PIN Code.

 

g When Wi-Fi Direct On? is displayed, press On to accept.

 

To cancel, press Off.

 

h When Activate Wi-Fi Direct on other device. Then Press [OK]. is displayed, activate

 

your mobile device’s WPS PIN configuration method (see your mobile device’s user’s guide for

 

instructions) and then press OK on your Brother machine. This will start the Wi-Fi Direct setup.

 

To cancel, press .

i The machine will wait for a connection request from your mobile device. When PIN Code appears, type the PIN displayed on your mobile device in to the machine.

Press OK.

j If your mobile device connects successfully, the machine displays the message Connected.

You have completed the Wi-Fi Direct network setup. For details on printing from or scanning to your mobile device, download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from the Brother Solutions Center (http://solutions.brother.com/).

If the connection fails, see Troubleshooting on page 14.

Manual configuration for a Wi-Fi Direct network

If your mobile device does not support Wi-Fi Direct or WPS, you must configure a Wi-Fi Direct network manually.

NOTE

When the machine receives the Wi-Fi Direct request from your mobile device, the message Wi-Fi Direct connection request received. will be displayed. Press OK to connect.

a Press .

b Press All Settings.

c Press Network.

d Press Wi-Fi Direct.

e Press Manual.

f When Wi-Fi Direct On? is displayed, press On to accept. To cancel, press Off.

g The machine will show the SSID name and Password for two minutes. Go to the wireless network settings page of your mobile device and type the SSID name and password.

8