Configuration methods

NOTE

When the machine receives the Wi-Fi Direct request from your mobile device, the message Received Wi-Fi Direct connection request. will be displayed. Press Connect to connect.

 

 

 

 

2

a Press Settings.

 

b Press s or t to choose Network.

 

c Press s or t to choose Wi-Fi Direct.

 

d Press s or t to choose Group Owner and then press On.

 

e Press s or t to choose Push Button.

 

f When Wi-Fi Direct On? is displayed, press On to accept.

 

To cancel, press Off.

 

g When Activate Wi-Fi Direct on other device. Then Press [OK]. is displayed, activate

 

your mobile device’s WPS one-push configuration method (see your mobile device’s user’s guide for

 

instructions) and then press OK on your Brother machine. This will start the Wi-Fi Direct setup.

 

To cancel, press

 

.

 

h If your mobile device connects successfully, the machine displays the message Connected.

 

You have completed the Wi-Fi Direct network setup. For details on printing from or scanning to your

 

mobile device, download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from

 

the Brother Solutions Center (http://solutions.brother.com/).

 

If the connection fails, see Troubleshooting on page 14.

 

Configuration using the PIN Method of Wi-Fi Direct

 

If your mobile device supports the PIN Method of Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct

 

network.

 

NOTE

 

 

 

 

 

 

 

 

When the machine receives the Wi-Fi Direct request from your mobile device, the message

 

Received Wi-Fi Direct connection request. will be displayed. Press Connect to connect.

 

a b c d

Press Settings.

Press s or t to choose Network.

Press s or t to choose Wi-Fi Direct.

Press PIN Code.

e When Wi-Fi Direct On? is displayed, press On to accept. To cancel, press Off.

11