Accessory List

Model Name

Description

PC-201

Printing Cartridge and a re-fill (1 set per box)

PC-202RF

2 re-fills for use in PC-201 Printing Cartridge

PC-204RF

4 re-fills for use in PC-201 Printing Cartridge

 

(not available in Australia)

*For optimum print quality and product performance within published specifications, use only the correct Brother replacement ribbon. Failure to use the genuine Brother consumable may damage the machine and such damages will not be covered under warranty.

Change Answer Mode

Press 9 8.

then for TAD, press 1.

Fax/Telephone (F/T), press 2.

(For FAX-1020e)

Fax, press 3.

Exit Remote Operation

Press 9 0.

Change Remote Access Code

1Press Menu/Set, 8, 3.

2Enter a three- digit number. Thecannnot be changed.

3Press Menu/Set.

4Press Stop/Exit.

(For FAX-1030e)

REMOTE CONTROL ACCESS CARD

Using Remote Access Code

1Dial your machine phone number from a touch tone phone.

2Enter your Remote Control Access Code (159) after the beep.

3Your machine signals the kinds of messages received:

1 long beeps – Fax message(s) No beeps – no messages

4After 2 short beeps, enter a command.

5Press 9 0 to reset your machine when you finish.

6Hang up.

4

1

Retrieve a Fax

Press 9 6.

then to Print a Memory Status List press 1, then enter the number of remote fax machine, and then # #. After the beep, hang up and wait.

Retrieve all faxes press 2, then enter the number of remote fax machine, and then # #. After the beep, hang up and wait.

Erase all fax messages press 3.

Check Receiving Status

Press 9 7.

then for Fax message, press 1. Voice message, press 2.

1 long beeps – received messages

3 short beeps – no messages

Change Answer Mode

Press 9 8.

then for Message Centre, press 1. Fax/Telephone (F/T), press 2. Fax Only, press 3.

Exit Remote Operation

Press 9 0.

MESSAGE MANAGER

REMOTE CONTROL ACCESS CARD

Using Remote Access Code

1Dial your fax machine phone number from a touch tone phone.

2Enter your Remote Control Access Code (159) after the beep.

3The fax machine signals the kinds of messages received:

1 long beep – Fax message(s)

2 long beeps – Voice message(s)

3 long beeps – Fax and Voice message(s) No beeps – no messages

4After 2 short beeps, enter a command.

5Press 9 0 to reset the machine when you finish.

6Hang up.

5

6

1

108