1 Setup
Initial Settings
Setting the Dialling Mode (Tone/Pulse) (Not available in New Zealand)
Your machine is initially set to TONE. If you are using a PULSE dial line, you can change the setting to PULSE by following the steps below.
1 Press Menu/Set, 1, 1. The screen prompts you to select TONE or PULSE.
2 Use 
or 
to select the dialling mode, and press Menu/Set when the screen displays the dialling mode you want.
3 Press Stop/Exit.
Although this equipment can use either Pulse or Tone signalling, only the performance of the Tone signalling is subject to regulatory requirements for correct operation. It is therefore strongly recommended that the equipment is set to use the Tone signalling for access to public or private emergency services. The Tone signalling also provides faster call set up.
Setting the Date and Time
The screen displays the date and time you set, whenever the machine is in
In the event of a power failure, the machine maintains date and time information for about 15 hours
1 Press Menu/Set, 1, 2.
2 Enter the two digits of the year, and press Menu/Set. “03” is registered as 2003 in the machine.
3 Enter two digits for the month and press Menu/Set.
4 Enter two digits for the day and press Menu/Set.
5 Enter the time in 24 hour format and press Menu/Set.
6 Press Stop/Exit.
USE BASIC
Setup 12