DIFFICULTY | SUGGESTIONS | ||||
|
|
|
|
|
|
Vertical Black Lines When | Use your machine to make a copy. If the copy shows the same | ||||
Sending | problem, the scanner area is dirty. Lift the front cover and check the | ||||
| document path. Clean the scanner’s white roller and the glass strip | ||||
| under the roller using isopropyl alcohol and a | ||||
|
|
|
|
|
|
Handling Incoming Calls |
|
|
|
|
|
|
|
|
|
|
|
F/T | The machine knows the incoming call is not a fax so it is signalling | ||||
Mode | you to answer the voice call. Pick up the machine’s handset or | ||||
| answer from an extension phone and press your machine’s Remote | ||||
| Deactivation Code (default setting is # 5 1 (# 9 1 for New Zealand)). | ||||
|
|
|
|
|
|
Transferring a Call to the | If you have answered at the machine’s handset, press Fax Start, | ||||
Machine | and hang up immediately. | ||||
| If you answered at an extension phone, press your | ||||
| Remote Activation Code (the factory setting is |
| 5 1 ( |
| 9 1 for |
|
|
| |||
| New Zealand)). When your machine answers, hang up. | ||||
|
|
|
|
|
|
Machine goes into receive | If the machine is set to Fax Detect ON, it is more sensitive to sounds. | ||||
mode when the caller is not a | The machine may mistakenly interpret certain voices or music on | ||||
fax | the line as a calling fax machine and respond with fax receiving | ||||
| tones. Deactivate the fax by pressing Stop/Exit. | ||||
| Try avoiding this problem by turning Fax Detect to OFF. (See Fax | ||||
| |||||
|
|
|
|
|
|
Transmission Verification | There is probably temporary noise or static on the phone line. Try | ||||
Report Prints | sending the fax again. If the problem continues, call the Telephone | ||||
“RESULT:ERROR” | Company to check your phone line. | ||||
|
|
|
|
|
|
MAINTENANCE
Troubleshooting and Maintenance 80