Erasing the Outgoing Message (OGM)

1 Press Menu/Set, 8, 3.

2 Press or to select MSG CTR OGM (or FAX/TEL OGM or PAGING OGM), and press Menu/Set when the screen displays your selection.

3 Press or to select ERASE MSG and press Menu/Set. 4 Press 1 to erase the OGM—OR—Press 2 to exit without erasing. 5 Press Stop/Exit.

Activating Message Centre Mode

Press and hold until the button lights and the screen displays TAD:MSG CTR.

When light is out, the Message Centre is off. (See Setting Up Message Centre, page 63.)

Message Indicator

The light flashes when you have new messages and/or faxes waiting for your review.

The LCD screen displays the total number of voice (including recorded conversations) and/or fax messages stored in Message Centre memory.

If you press the flashing to turn off the Message Centre before getting your new messages, they won’t be lost. The new messages will be played automatically and the LCD will ask you to acknowledge the new faxes:

VOICE:03 DOC:02

PRINT DOC?

1.YES 2.NO

Press 1 to print (and automatically delete) the faxes from memory—OR—Press 2 to save the faxes in memory until printing is convenient.

What Happens When the Memory Is Full...

If the memory becomes full when you have set your machine to Message Centre mode, the machine will change to F/T mode automatically. In this mode, the machine can accept incoming faxes automatically. Then, if your machine should run out of paper, the answer mode will shift automatically to manual mode. In manual mode the call is not answered, so your caller will know to try again later.

Out of Recording Paper and Memory Full

[Answer Mode]

Message Centre Mode

 

 

 

 

F/T Mode

 

 

 

 

 

Manual Mode

 

 

 

 

 

 

 

 

Out of

 

Recording Paper

 

Memory Full

 

 

 

 

 

 

 

 

and Memory Full

Print the Memory Status List and select the item to be cleared. This will clear space for new messages and faxes to be stored in memory. (See Printing Reports, page 31.)

65Chapter 12