MESSAGE CENTER
9 - 6
Setting Maximum Time for Incoming Messages
Your fax machine comes set to receive voice messages up to 30 seconds long. You can
change this setting to any length from 20 seconds to 60 seconds, in 5-second
increments.
1
Press Menu/Set, 8, 4.
2
Press to select the maximum time setting
for incoming messages, and then press
Menu/Set.
3
Press Stop/Exit.
Setting Toll Saver
When you set the toll saver feature, the fax machine answers after four rings if you
don’t have messages, and after two rings if you do have messages. This way, when
you call the fax machine and let it ring three times, you know you have no messages,
and can hang up, to avoid a toll charge.
1
Press Menu/Set, 2, 1.
2
Press to select the TOLL SAVER
(or RING DELAY), and then press Menu/Set.
3
Press to select ON, and then press Menu/Set.
4
Press Stop/Exit.
ICM Recording Monitor
This feature lets you turn the speaker volume for voice messages ON or OFF. When
you turn the monitor OFF, you will not hear messages as they come in.
1
Press Menu/Set, 8, 5.
2
Use to select OFF (or ON), and then press
Menu/Set.
3
Press Stop/Exit.
When Toll Saver is ON, it overrides your Ring Delay setting. Toll Saver must be off
for the fax machine to operate using your Ring Delay setting. (See Setting Ring
Delay, page 5-2.)
4.ICM MAX.TIME
MESSAGE 30 SEC?
or
1.RING DELAY
or
or
5.ICM REC.MONITR
or