Setting Volume Amplify

Please carefully read “Setting the Handset Volume” before you do the following steps:

1

Press Function/Set, 1, 4.

2

Press

or

to select VOL

AMPLIFY:OFF? if none of the users are hearing-impaired and go to Step 4— OR—If some or all of the users are hearing-impaired, select VOL AMPLIFY:ON?

VOL AMPLIFY:OFF? SELECT <- -> & SET

3 Press or to select PERMANENT? if all the users are hearing-impaired— OR— Select TEMPORARY? if only some of the users are hearing-impaired..

4 Press Function/Set.

5 Press Stop to exit.

PERMANENT? SELECT <- -> & SET

Setting the Speaker Volume

You can adjust the speaker volume when your fax machine is onhook (after you pressed Hook), by selecting a speaker volume level.

Press or to adjust the volume level. The display shows the setting you are choosing. Each key press changes the volume to the next setting. The new setting will remain until you change it again.

Setting the Ring Volume

You can adjust the ring volume when your fax machine is idle. You can select a ring volume level or press until the ring is off.

Press or to adjust the volume level. With each key press, the fax machine rings so you can hear the current setting and the display shows the setting you are choosing. Each key press changes the volume to the next setting. The new setting will remain until you change it again.

Memory Storage

In the event of a power failure, all settings in the INITIAL SETUP, SETUP RECEIVE, SET AUTO DIAL and REMOTE FAX OPT plus the COVERPG SETUP and COVERPAGE MSG (from SETUP SEND) functions are stored permanently. You may have to reset the date and time.

4 - 5 I N I T I A L S E T U P