S E T U P
S E N D
6 - 4
Press 1 to select additional settings. The display returns to the SETUP SEND menu
— OR—Press2 if you are finished choosing settings and go to Step 6.
5
Press 1 to leave the originals waiting in the 1.DOC 2.MEMORY ADF— OR—Press2 to scan the original into
memory.
4
Press Function/Set, 3, 7.
Place the original face down in the ADF.
1
2
3 Enter the time you want the fax to be sent, in 24-hour format and press Function/Set. (For example, enter 19:45 for 7:45 PM)
Enter the fax number you’re calling. Press Start.
Delayed FAX
You can use this function to send a fax up to 24 hours later.
5
6
Press 1 if you want to select additional settings. The display returns to the Setup Send menu— OR—Press2 if you are finished choosing settings and go to Step 5.
4
Function/Set.

Resolution

When you have an original in the ADF, you can use the Resolution key. Press Resolution continuously until you see your selection on the screen.

Standard—suitable for most typed originals.

Fine—good for small print; transmits a little slower than standard resolution.

Super Fine—good for small print or artwork; transmits slower than fine resolution.

Photo—use when original has varying shades of gray; slowest transmission time.

Advanced Sending Operations

Overseas Mode

If you have difficulty sending a fax overseas, use the Overseas mode.

After you send a fax using this feature, the feature turns itself off.

1

Place the original face down in the ADF.

 

2

Press Function/Set, 3, 5.

5.OVERSEAS MODE

3

 

 

 

Press

or

to select ON (or OFF) and press