Contrast
If your original is very light or very dark, you might want to set the contrast accordingly. Use S.LIGHT to send a very light original. Use S.DARK to send a very dark original.
Place the original face down in the ADF. Press Function/Set, 3, 3.
Basic Sending Operations

Memory Transmission

This feature allows your machine to scan a fax into its memory and send it as soon as the scan is complete. This way, you don’t have to wait for the entire fax to be transmitted before you retrieve your original.

1

2

3

Place the original face down in the ADF.

Press Function/Set, 3, 9.

To change the default setting, press or to select ON (or OFF) and press Function/Set. Go to Step 5— OR—For the next fax

transmission only, press or to select NEXT FAX ONLY and press Function/Set.

9.MEMORY TX

MEMORY TX:ON? SELECT <- -> & SET

4

5

For the next fax only, press or to select ON (or OFF) and press Function/Set.

Press 1 to select additional settings. The display returns to the SETUP SEND menu

OR—Press 2 if you are finished choosing settings and go to Step 6.

6 Enter fax number and press Start.

If you get a MEMORY FULL message while scanning the first page of a fax, press Stop to cancel the scan. If you get a MEMORY FULL message while scanning in a subsequent page, you’ll have the option to press Start to transmit the pages scanned so far, or to press Stop to cancel the operation. In this case, send the fax by the Manual Transmission.

Depending on your typical faxes, MEMORY FULL errors can occur frequently. If this happens, change the Memory Transmission setting back to OFF.

1

2

3

Press

or

to select AUTO, S.LIGHT or S.DARK and press Function/Set.

4

Press 2 if you are finished choosing settings, and go to Step 5—

OR—Press 1 if you

 

want to select additional settings. The display returns to the Setup Send menu.

5

Enter a fax number and press Start to send a fax— OR—Press

Copy/Help to make

 

a copy.

 

 

 

S E T U P S E N D

6 - 3