Control panel features
Ethernet (wired network only)
Ethernet link mode. Auto allows the print server to operate in
100
Note
If you incorrectly set this value, you may not be able to communicate with your print server.
a Press any of the Menu buttons (+,
b Press + or - to choose Network. Press OK.
c Press + or - to choose Wired LAN. Press OK.
d Press + or | - to choose Ethernet. |
Press OK. | 8 |
e Press + or - to choose Auto,
Factory Reset
The Factory Reset allows you to reset the print server back to its factory default settings. For more information and resetting, see Reset the network settings to the factory default on page 59.
Set to Default (For
The Set to Default allows you to reset each wired or wireless network setting to the factory default.
a
b Press + or - to choose Network. Press OK.
c (For wired) Press + or - to choose Wired LAN. (For wireless) Press + or - to choose WLAN. Press OK.
d Press + or - to choose Set to Default. Press OK.
e When OK? appears, press OK again.
53