Wireless configuration using WPS or AOSS from the control panel (For
g If the LCD shows Connected, the machine has successfully connected to your access point/router. You can now use your machine in a wireless network.
If the LCD shows Connection Error, a session overlap has been detected. The machine has detected more than one access point/router on your network with the
If the LCD shows No Access Point, the machine has not detected your access point/router on your network with the
If the LCD shows Connection Fail, the machine has not successfully connected to your access |
| ||
point/router. Try starting from a again. If the same message is indicated again, reset the print server |
| ||
back to its factory default settings and try again. (For resetting, see Reset the network settings to the | 6 | ||
factory default on page 59.) |
| ||
LCD messages when using the WPS/AOSS control panel menu |
| ||
|
|
|
|
LCD shows | Connection status | Action |
|
Setting WLAN | Searching or accessing the access point, |
|
|
| and downloading settings from the access | - |
|
| point |
|
|
|
|
|
|
Connecting WPS | Connecting the access point | - |
|
Connecting AOSS |
|
| |
|
|
| |
Connected | Connection succeeded. | - |
|
Connection Error | Session overlap has been detected. | Check that only one router or access |
|
|
| point has the |
|
|
| mode or AOSS™ mode enabled and try |
|
|
| starting from a again. |
|
|
|
|
|
No Access Point | The access point detection failed. | 1 Move the machine closer to your |
|
|
| access point/router and try starting |
|
|
| from step a again. |
|
|
| 2 If the same message continues, |
|
|
| reset the print server back to its |
|
|
| factory default settings and try |
|
|
| again. |
|
|
|
|
|
Connection Fail | Connection failed. | 1 Try starting from a again. |
|
|
| 2 If the same message continues, |
|
|
| reset the print server back to its |
|
|
| factory default settings and try |
|
|
| again. |
|
|
|
|
|
34