Configuring your machine for a wireless network (For HL-3075CW)
WPA-PSK/WPA2-PSK
Enables a Wi-Fi Protected Access Pre-shared Key (WPA-PSK/WPA2-PSK), which enables the Brother wireless machine to associate with access points using TKIP for WPA-PSK or AES for WPA-PSK and WPA2-PSK encryption (WPA-Personal).
LEAP
| Cisco LEAP (Light Extensible Authentication Protocol) has been developed by Cisco Systems, Inc. which | 3 |
| uses a user ID and password for authentication. |
| |
EAP-FAST
EAP-FAST (Extensible Authentication Protocol - Flexible Authentication via Secured Tunnel) has been developed by Cisco Systems, Inc. which uses a user ID and password for authentication, and symmetric key algorithms to achieve a tunneled authentication process.
The Brother machine supports the following inner authentications:
•EAP-FAST/NONE
EAP-FAST authentication for CCXv3 networks. Does not use an inner authentication method.
•EAP-FAST/MS-CHAPv2
EAP-FAST authentication for CCXv4 networks. Uses MS-CHAPv2 for the inner authentication method.
•EAP-FAST/GTC
EAP-FAST authentication for CCXv4 networks. Uses GTC for the inner authentication method.
Encryption methods
Encryption is used to secure the data that is sent over the wireless network. The Brother machine supports the following encryption methods:
None
No encryption method is used.
WEP
By using WEP (Wired Equivalent Privacy), the data is transmitted and received with a secure key.
TKIP
TKIP (Temporal Key Integrity Protocol) provides per-packet key mixing a message integrity check and rekeying mechanism.
AES
AES (Advanced Encryption Standard) is Wi-Fi authorized strong encryption standard.
CKIP
The original Key Integrity Protocol for LEAP by Cisco Systems, Inc.
20
