Brother HL-3045CN, HL-3075CW 64

Press any of the Menu buttons (+, -,OK or Back) of the control panel on your machine.

Control panel features

Wired Enable (For HL-3075CW wired network only)

If you want to use the wired network connection, set Wired Enable to On.

b Press + or - to choose Network. Press OK.

c Press + or - to choose Wired LAN. Press OK.

d Press + or - to choose Wired Enable. Press OK.

e Press + or - to choose On or Off. Press OK.

WLAN Enable (For HL-3075CW wireless network only)

If you want to use the wireless network connection, set WLAN Enable to On.	8

b Press + or - to choose Network. Press OK.

c Press + or - to choose WLAN. Press OK.

d Press + or - to choose WLAN Enable. Press OK.

e Press + or - to choose On. Press OK.

WPS or AOSS (For HL-3075CW wireless network only)

If your wireless access point/router supports either Wi-Fi Protected Setup (PBC 1) or AOSS™, you can configure the machine easily without a computer. Your Brother machine has the WPS/AOSS menu on the control panel. This feature automatically detects which mode your access point uses Wi-Fi Protected Setup or AOSS™. By pushing a button on the wireless access point/router, you can setup the wireless network and security settings. See the user’s guide for your wireless access point/router for instructions on how to access one-push mode. (See Wireless configuration using WPS or AOSS from the control panel (For HL- 3075CW) in Chapter 6.)

1Push Button Configuration