Configuring your machine for a network

c Double-click the unconfigured device.

 

Windows®

Macintosh

2

Note

•If the print server is set to its factory default settings (if you don’t use a DHCP/BOOTP/RARP server), the device will appear as Unconfigured in the BRAdmin Light utility screen.

•You can find the node name and MAC Address (Ethernet Address) by printing out the Network Configuration page.

See Printing the Network Configuration page on page 60.

d Choose STATIC from Boot Method. Enter the IP Address, Subnet Mask and Gateway (if needed) of

your print server.

 

Windows®

Macintosh

e f

Click OK.

With the correctly programmed IP address, you will see the Brother print server in the device list.

14