Configuring your machine for a wireless network (For HL-3075CW)

Confirm your wireless network setup method

There are three methods to configure your wireless network machine. Use the Brother installer application on the CD-ROM (recommended). Use the one-push wireless setting mode or use the PIN Method of Wi-Fi Protected Setup. The setup process will be different depending on your network environment.

Configuration using the Brother installer application on the CD-ROM to

3

configure your machine for a wireless network (Recommended)

 

We recommend that you use the Brother installer application on the CD-ROM we have provided with the machine. By using this application, you can easily connect your machine to your wireless network and install the network software and printer driver which you need to complete the configuration of your machine for a wireless network. You will be guided by the on-screen instructions until you are able to use your Brother wireless network machine. You must know your wireless network settings before you proceed with this installation.

Configuration temporarily using a USB cable

You can temporarily use a USB cable to configure your Brother machine for your wireless network.

USB method

„You can remotely configure the machine from a computer that is also on the network using a USB cable

(A) 1.

1You can configure the wireless settings of the machine using a USB cable temporarily connected to a wired or wireless computer.

24