Brother HL-3045CN, HL-3075CW manual 141

				Appendix
Level one	Level two	Level three	Level four	Options
Network	Wired LAN	TCP/IP	IP Boot	0 to 32767
			Tries	3*	B
			APIPA	On* , Off
			IPv6	On , Off*
		Ethernet	-	Auto* , 100B-FD ,100B-HD ,10B-FD ,10B-
				HD
		Set to Default	-	OK?
		Wired Enable	-	On*, Off
	WLAN	TCP/IP	Boot Method	Auto* , Static , RARP , BOOTP , DHCP
			IP Address	[000-255] .[000-255] .[000-255] . [000-
				255]
				[000-000] .[000-000] .[000-000] . [000-
				000]*
			Subnet Mask	[000-255] .[000-255] .[000-255] . [000-
				255]
				[000-000] .[000-000] .[000-000] . [000-
				000]*
			Gateway	[000-255] .[000-255] .[000-255] . [000-
				255]
				[000-000] .[000-000] .[000-000] . [000-
				000]*
			IP Boot	0 to 32767
			Tries	3*
			APIPA	On* , Off
			IPv6	On , Off*
		SES/WPS/AOSS	-	See Wireless configuration using WPS or
				AOSS from the control panel (For HL-
				3075CW) in Chapter 6.
		WPS w/PIN Code	-	See Wireless configuration using the PIN
				Method of Wi-Fi Protected Setup (For HL-
				3075CW) in Chapter 7.
		WLAN Status	Status	See Status on page 55.
			Signal	See Signal on page 56.
			Channel	See Channel on page 56.
			Speed	See Speed on page 57.
			SSID	See SSID on page 57.
			Comm. Mode	See Comm. Mode on page 58.
		Set to Default	-	OK?
		WLAN Enable	-	On , Off*
	Factory	-	-	Restart Printer?
	Reset
				131