Control Panel
Default settings
If you want to reset the print server back to its factory default settings (resetting all information such as the password and IP address information), follow these steps:
Network default settings
a
b4
c Hold down Go as you turn on the power switch. Keep Go pressed down until all the LEDs light up and then Status LED turns off.
d
e Press Go six times. Make sure that all the LEDs light up to indicate the print server has been reset to its factory default settings. The printer will restart.
Factory Reset
You can partially reset the machine back to its default printer settings. The settings that will not be reset the Network settings:
a b
c Hold down Go as you turn on the power switch. Keep Go pressed down until all the LEDs light up and then Status LED turns off.
d
e Press Go eight times. Make sure that all the LEDs light up to indicate the print server has been reset to its factory default settings. The printer will restart.
Settings Reset
This operation will reset all the machine settings back to the settings that were set at the factory:
a b
c Hold down Go as you turn on the power switch. Keep Go pressed down until all the LEDs light up and then Status LED turns off.
d Release Go. Make sure that all the LEDs are off.
e Press Go ten times. The printer will automatically restart.
88