Troubleshooting and Routine Maintenance
133
cOpen the new ink cartridge bag for the
colour shown on the LCD, and then take
out the ink cartridge.
dRemove the protective yellow cap (1).
Improper Setup
DO NOT touch the area shown in the
illustration below.
Note
If the protective yellow caps come off
when you open the bag, the cartridge will
not be damaged.
eEach colour has its own correct position.
Insert the ink cartridge in the direction of
the arrow on the label.
fLift the lock release lever and push it
until it clicks, and then close the ink
cartridge cover.
gIf you replaced an ink cartridge, the LCD
may ask you to verify that it was a brand
new one. (For example,
Did You Change Black) For each
new cartridge you installed, press
1(Yes) to automatically reset the ink dot
counter for that colour. If the ink
cartridge you installed is not a brand
new one, be sure to press 2 (No).
If you wait until the LCD shows Near
Empty and Ink Empty, the machine
will automatically reset the ink dot
counter.
1
Mbrother
XXXX