20
3
Power Save mode 3
When the machine is idle, you can put the
machine into Power Save mode by pressing
the Power Save key. You can still receive
telephone calls in Power Save mode. For
further information on receiving faxes in the
power save condition, please see the table on
On/Off setting on page 21. The delayed
faxes that have been set up will be sent. You
can even retrieve faxes using Remote
Retrieval if you are away from your machine.
If you want to do other operations, you must
take the machine out of Power Save mode.
Note
If you have connected an external
telephone or TAD, it is always available.
Putting your machine in
Power Save mode 3
aPress and hold down the Power Save
key until the LCD shows Shutting
Down.
The LCD light goes off.
Bringing your machine out of
Power Save mode 3
aPress and hold down the Power Save
key until the LCD shows Please Wait.
The LCD shows the date and time.
Note
Even if you have put the machine into
Power Save mode, it will periodically clean
the print head to preserve print quality.
If you unplug the AC power cord, no
machine operations will be available.
You can customize Power Save mode so
that, apart from automatic head cleaning,
no machine operations are available. (See
Power Save setting on page 20.)
Power Save setting 3
You can customize the machine's Power
Save key. The factory setting is
Fax Receive:On. Your machine can
receive faxes or calls even when the machine
is in Power Save mode. If you do not want
your machine to receive faxes or calls, turn
this setting to Fax Receive:Off. (See
Power Save mode on page 20.)
aPress Menu.
bPress a or b to choose
General Setup.
Press OK.
cPress a or b to choose
P.Save Setting.
Press OK.
dPress a or b to choose
Fax Receive:Off (or
Fax Receive:On).
Press OK.
ePress Stop/Exit.
General setup 3