Digital TAD (MFC-660CN only)
65
9
Erasing incoming messages 9
To erase voice messages individually9
aPress Play/Record.
The machine will sound a two second
beep and begins message playback.
Each message is preceded by one long
beep, and followed by two short beeps.
bTo erase a specific message, press
Erase/Mute immediately after the two
short beeps, or while the message is
playing.
cDo one of the following:
Press 1 to erase the message.
Press 2 to cancel.
dPress Stop/Exit.
To erase all of your messages 9
aPress Erase/Mute.
bDo one of the following:
Press 1 to erase all of your voice
messages.
Press 2 to cancel.
cPress Stop/Exit.

Additional TAD

operations 9
Setting maximum time for
incoming messages 9
Your machine’s default setting will save
incoming messages up to 30 seconds long.
To change this setting follow the steps below:
aPress Menu.
bPress a or b to choose Fax.
Press OK.
cPress a or b to choose Setup TAD.
Press OK.
dPress a or b to choose ICM Max.
Time.
Press OK.
ePress a or b to choose the maximum
time setting for incoming messages (30,
60, 120 or 180 seconds).
Press OK.
fPress Stop/Exit.