Chapter 5
38
fWhen you have finished, press
Stop/Exit.
Setting your changes as a
new default 5
You can save the fax settings for
Fax Resolution, Contrast,
Real Time TX and Scan Size you use
most often by setting them as default. These
settings will stay until you change them again.
aPress (Fax).
bPress a or b to choose your new
setting.
Press OK.
Repeat this step for each setting you
want to change.
cAfter changing the last setting, press a
or b to choose Set New Default.
Press OK.
dPress 1 to choose Yes.
ePress Stop/Exit.
Restoring all settings to the
factory settings 5
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
aPress (Fax).
bPress a or b to choose
Factory Reset.
Press OK.
cPress 1 to choose Yes.
dPress Stop/Exit.
Sending a fax manually 5
Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
aPress (Fax).
bLoad your document.
cPick up the handset of an external
phone or the machine and listen for a
dial tone.
You can also press Speaker Phone
(MFC-660CN) and listen for a dial tone.
dDial the fax number you want to call.
If you pressed Speaker Phone, dial
using the machine's dial pad. If you
picked up the external handset, dial on
the external phone.
eWhen you hear the fax tone, press
Mono Start or Colour Start.
If you are using the scanner glass
press 1 to send a fax.
fIf you picked up the handset replace it.