Chapter 2
16
Loading paper and other media 2
Note
• For Tray#2, see Loading paper in paper
tray#2 (MFC-5860CN only) on page 18.
• If you are using Auto Select
(MFC-5860CN only), after refilling the
paper tray you should open and close the
scanner cover to reset the machine.
aPull the paper tray completely out of the
machine.
If the paper support flap is open, close it
and lift the output paper tray cover (1).
bPress and slide the paper side
guides (1) and paper length guide (2) to
fit the paper size.
cFan the stack of paper well to avoid
paper jams and misfeeds.
Note
Always make sure that the paper is not curled.
dGently put the paper into the paper tray
print side down and top edge first.
Check that the paper is flat in the tray.
1
1
2