Troubleshooting and Routine Maintenance
105
Error messages B
As with any sophisticated office product, errors may occur. If this happens, your machine identifies
the error and shows an error message. The most common error messages are shown below.
You can correct most errors by yourself. If you need more help, the Brother Solutions Center offers
the latest FAQs and troubleshooting tips.
Visit us at http://solutions.brother.com.
Your computer canno t find your
machine. <Windows® users>
Firewall setting on you PC may be rejecti ng the necessary ne twork connection .
For detail, see the instruction above.
<Macintosh® users>
Re-select your machin e in the DeviceSe lector application located in Macintos h
HD/Library/Printers/Brother/Ut ilities or from the model of C ontrolCenter2.
Error Message Cause Action
Change Unable XX
The machine has a mechanical
problem.
—OR—
A foreign objects such as a clip or
ripped paper is in the machine.
Open the scanner cover and remove any fo reign
objects inside the machine. If the error message
continues, see Transferring you r faxes or Fax
Journal report on page 1 08 before disconnecting
the machine so you will not lose any important
messages. Then, disconnect t he machine from
the power for several minutes and then reconnect
it.
Clean Unable XX
The machine has a mechanical
problem.
—OR—
A foreign objects such as a clip or
ripped paper is in the machine.
Open the scanner cover and remove any fo reign
objects inside the machine. If the error message
continues, see Transferring you r faxes or Fax
Journal report on page 1 08 before disconnecting
the machine so you will not lose any important
messages. Then, disconnect t he machine from
the power for several minutes and then reconnect
it.
Comm.Error Poor phone line quality caused a
communication error.
Send the fax again or connect the machine to
another telephone line. If the problem continues,
call the telephone company and ask them to
check your phone line.
Cover is Open The scanner cover is not closed
completely.
Lift the scanner cover and then close it again.
The ink cartridge cover is not
completely closed.
Firmly close the ink cartridge cover until it clicks.
Network Difficulties (Continued)
Difficulty Suggestions