Sending a fax
31
5
Faxing A4 size documents
from the scanner glass 5
When documents are A4 size, you need to
set Scan Size to A4. If you do not, the bot tom
portion of the faxes will be missing.
aMake sure you are in Fax mode .
bPress Menu, 2, 2, 0.
cPress a or b to choose A4.
Press OK.
Color fax transmission 5
Your machine can send a color fax to
machines that support this feature.
However, color faxes cannot be stored in the
memory. When you send a color fax, the
machine will send it in real time (even if
Real Time TX is set to Off).
Canceling a fax in progr ess 5
If you want to cancel a fax while the machine
is scanning, dialing or sending, press
Stop/Exit.
Broadcasting (Black & White only) 5
Broadcasting is when the same fax message
is automatically sent to more than one fax
number. You can include Groups, Speed-Dial
numbers and up to 50 manually dialed
numbers in the same broadcast.
After the broadcast is finished, a Broadcast
Report will be printed.
aMake sure you are in Fax mode .
bLoad your document.
cEnter a number. Press OK.
You can use either a Speed-Dial, a
Group, or a manually entered number
using the dial pad.
dRepeat step c until you have entered
all the fax numbers you wish to
broadcast to.
ePress Black Start.
Note
• If you did not use up any of the numbers
for Groups or access codes or credit card
numbers, you can ‘broadcast’ faxes to as
many as 150 different numbers.
• The available memory will vary depending
on the types of jobs in the memory and the
number of locations used for
broadcasting. If you broadcast to the
maximum numbers available, you will not
be able to use dual access.
• Enter the long dialing sequence numbers
as you would normally, but remember that
each Speed-Dial number counts as one
number, so the number of locations you
can store becomes limited.
• I f the memory is full, press Stop/Exit to
stop the job. If more than one page has
been scanned, press Black Start to send
the portion that is in the memory.