Brother MFC-8870DW, MFC-8860DN, MFC-8460N Loading documents and paper

10
2
Loading documents 2
All fax, scan and copy operations can be
performed from the ADF or the scanner
glass.
Using the ADF 2
You can use the ADF (automatic document
feeder) to fax, scan or copy sheets of paper.
The ADF feeds each sheet one at a time.
When loading the ADF, make sure that
documents written with ink are completely
dry.
Single-Sided Document
Documents must be from 148.0 to 215.9 mm
wide (5.8 to 8.5 inches) wide and 148.0 to
355.6 mm (5.8 to 14 inches) long, and of a
standard weight (80 g/m2 (20 lb)).
2-Sided Document
(MFC-8860DN and MFC-8870DW only)
When you load a 2-sided document, the
document must be from 148.0 to 215.9 mm
(5.8 to 8.5 inches) wide and 148.0 to 297.0
mm (5.8 to 11.7 inches) long.
For information on the capacity of the ADF
see Specifications on page 148.
aUnfold the ADF document output
support flap (1).
bFan the pages well.
cPlace your documents face up, top edge
first in the ADF until you feel them touch
the feed roller.
dAdjust the paper guides to fit the width of
your documents.
CAUTION
To avoid damaging your machine while
using the ADF, do not pull on the document
while it is feeding.
To scan non standard documents, see
Using the scanner glass on page 11.
Loading documents and paper 2
1