Security features
25
4

Setting the password for the

administrator 4
The password you set in these steps is for the
administrator. This password is used to set
up restricted users and to turn Secure
Function Lock on or off. See Setting up
restricted users on page 26 and Turning
Secure Function Lock on on page 26.
aPress Menu, 1, 9, 2.
19.Security
2.Function Lock
New Passwd:
Enter & OK Key
bEnter a four-digit number for the
password. Press OK.
cRe-enter the password when the LCD
shows Verify:. Press OK.
dPress Stop/Exit.
Setting up the Public user 4
You can set up the Public user. Public users
do not need to enter a password.
Note
You must disable at least one function.
aPress Menu, 1, 9, 2.
19.Security
2.Function Lock
aLock OffiOn
bSet Password
Select ab & OK
bPress a or b to select Setup User.
Press OK.
cEnter the Administrator password.
Press OK.
19.Security
Setup User
aPublic
bUser01
Select ab & OK
dPress a or b to select Public.
Press OK.
ePress a or b to select Enable or
Disable for Fax Tx. Press OK.
After you have set Fax Tx, repeat this
step for Fax Rx, Copy, Scan and PCprint
1. Press OK.
1You can set PCprint for only the Public user .
fPress Stop/Exit.