Brother MFC-8870DW, MFC-8860DN, MFC-8460N b, c, i, d, e, f, g, h, b, c, b, c

Chapter 4
26
Setting up restricted users 4
You can set up users with restrictions and a
password.
aPress Menu, 1, 9, 2.
19.Security
2.Function Lock
aLock OffiOn
bSet Password
Select ab & OK
bPress a or b to select Setup User.
Press OK.
cEnter the Administrator password.
Press OK.
19.Security
Setup User
aPublic
bUser01
Select ab & OK
dPress a or b to select User01.
Press OK.
eUse the dial pad to enter the user name.
(See Entering Text on page 146.)
Press OK.
fEnter a four-digit password for the user.
Press OK.
gPress a or b to select Enable or
Disable for Fax Tx. Press OK.
After you have set Fax Tx, repeat this
step for Fax Rx, Copy and Scan.
Press OK.
hRepeat d to g for entering each
additional user and password.
iPress Stop/Exit.
Turning Secure Function Lock on/off 4
If you enter the wrong password when
following the instructions below, the LCD will
show Wrong password. Re-enter the
correct password.
Turning Secure Function Lock on 4
aPress Menu, 1, 9, 2.
19.Security
2.Function Lock
aLock OffiOn
bSet Password
Select ab & OK
bPress a or b to select Lock OffiOn.
Press OK.
cEnter your four-digit administrator
password. Press OK.
Turning Secure Function Lock off 4
aPress Menu, 1, 9, 2.
19.Security
2.Function Lock
aLock OniOff
bSet Password
Select ab & OK
bPress a or b to select Lock OniOff.
Press OK.
cEnter your four-digit administrator
password. Press OK.