95
C
Troubleshooting C
If you think there is a problem with your machine, check the chart below and follow the
troubleshooting tips.
Most problems can be easily resolved by yourself. If you need additional help, the Brother
Solutions Center offers latest FAQs and troubleshooting tips. Visit us at
http://solutions.brother.com.
Solutions to common problems C
If you think there is a problem with the way your faxes look, make a copy first. If the copy looks
good, the problem is probably not your machine. Check the chart below and follow the
troubleshooting tips.
The Brother Solutions Center offers the latest FAQs and troubleshooting tips.
Visit us at http://solutions.brother.com.

Troubleshooting and

routine maintenance C
Printing or Receiving Faxes
Difficulties Suggestions
Condensed print
Horizontal streaks
Top and bottom sentences are
cut off
Missing lines
Usually this is caused by a poor telephon e connection. If y our copy looks good ,
you probably had a bad connection, with s tatic or interferenc e on the telephone
line. Ask the other party to send the fax again.
Poor printing quality See Improving the print quality on page 101.
Vertical black lines when receiving Your machine’s primary corona wire for printing may be dirty. Clean your primary
corona wire. (See Cleaning the corona wire on page 120.)
The sender’s scanner may be dirty. Ask the sender to make a copy to see if the
problem is with the sending machine. Try receiving from another fax machine.
If the problem continues, call Brother or your dealer for service.
Received faxes appear as split or
blank pages.
If the received faxes are divided and printed on two pages or if you get an extra
blank page, your paper si ze setting may not be correct fo r the paper you are using.
(See Paper Size on page 18.)
Turn on auto reduction. (See Printing a reduced incoming fax on page 43.)