Brother MFC-8870DW, MFC-8860DN, MFC-8460N manual b, c, b c

Chapter 6
44
Setting the Fax Receive
Stamp 6
You can set the machine to print the received
date and time in the top centre of each
received fax page.
aMake sure you are in Fax mode .
bPress Menu, 2, 1, 9.
21.Setup Receive
9.Fax Rx Stamp
aOn
bOff
Select ab & OK
cPress a or b to choose On or Off.
Press OK.
dPress Stop/Exit.
Note
• The received time and date will not appear
when using Internet Fax* (*MFC-8860DN
and MFC-8870DW only).
• Make sure you have set the current date
and time in the machine.
Receiving faxes into memory 6
As soon as the paper tray becomes empty
during fax reception, the screen will display
No Paper, asking you to put paper in the
paper tray. (See Loading paper, and other
media on page 14.) If you are unable to put
paper in the paper tray the following will
happen:
If Memory Receive is On:6
The machine will carry on receiving the fax,
with the remaining pages being stored in
memory, if enough memory is available.
Further incoming faxes will also be stored into
memory until the memory is full. When the
memory is full the machine will stop
automatically answering calls. To print the
faxes, put fresh paper in the tray.
If Memory Receive is Off:6
The machine will carry on receiving the fax,
with the remaining pages being stored in
memory, if enough memory is available. The
machine will then stop automatically
answering calls until fresh paper is put in the
paper tray. To print the last fax you received,
put fresh paper in the tray.
aMake sure you are in Fax mode .
bPress Menu, 2, 1, 6.
cUse a or b to select On or Off. Press
OK.
dPress Stop/Exit.