Chapter 2
Setting and changing the Administrator PasswordSetting up the passwordThe password you set in these steps is for the administrator. This password is used to set up users and to turn the Secure Function Lock on or off. (See Setting up and changing restricted users uu page 9 and Turning Secure Function Lock on/off uu page 11.)
Note
Make a careful note of the administrator password. If you enter the wrong password, the LCD will show
Wrong Password.
a Press Menu.
b Press a or b to display General Setup. Press General Setup.
c Press a or b to display Security. Press Security.
d Press Function Lock.
e Enter a
Press OK.
f
Press OK.
g Press Stop/Exit.
b Press a or b to display General Setup. Press General Setup.
c Press a or b to display Security. Press Security.
d Press Function Lock.
e Press Set Password.
f Enter the registered
Press OK.
g Enter a
Press OK.
h
Press OK.
i Press Stop/Exit.8