Chapter 7
Setting your changes as the new default
You can save the copy settings for Quality, Brightness and Contrast you use most often by setting them as the default. These settings will stay until you change them again.
a
b Press d or c to choose the setting you want to change, and then press the new option.
Repeat this step for each setting you want to change.
c After changing the last setting, press
dor c to display Set New Default. Press Set New Default.
d Press Yes.
e Press Stop/Exit.
Restoring all copy settings to the factory settingsYou can restore all the copy settings you have changed to the factory settings. These settings will stay until you change them again.
a
b Press d or c to display Factory Reset. Press Factory Reset.
c Press Yes.
d Press Stop/Exit.
You can store the copy settings that you use most often by setting them as a favorite. You can set up to three favorites.
a Press Copy.
b Choose the copy option and settings you want to store.
c Press d or c to display Favorite Settings. Press Favorite Settings.
d Press Store.
e Press the location where you want to store your setting for Favorite:1,
Favorite:2 or Favorite:3.
f Do one of the following:
If you want to rename your setting,
press to delete characters. Then enter the new name (up to 12 characters). Press OK.
If you do not want to rename your setting, press OK.
g Press Stop/Exit.
Retrieving your favorite settingWhen you are ready to use one of your favorite set of settings, you can recall it.
a Press Copy. |
|
b Press | Favorite. |
c Press the favorite setting you want to retrieve.
d Press Start.
60