
Chapter 3
Canceling a Broadcast in progressWhile broadcasting you can cancel the fax currently being sent or the whole broadcast job.
a Press Stop/Exit.b Do one of the following:
To cancel the entire broadcast, press
Entire Broadcast. Go to step c.
To cancel the current job, press the button that displays the number being dialed. Go to step d.
To exit without canceling, press Stop/Exit.
c When the LCD asks if you want to cancel the entire broadcast, do one of the following:
Press Yes to confirm.
To exit without canceling, press No or Stop/Exit.
d Do one of the following:
To cancel the current job, press Yes.
To exit without canceling, press No or Stop/Exit.
When you are sending a fax, the machine will scan the documents into the memory before sending it. Then, as soon as the telephone line is free, the machine will start dialing and sending.
Sometimes, you may want to send an important document immediately, without waiting for memory transmission. You can turn on Real Time TX.
Note
•If the memory is full and you are sending a fax from the ADF, the machine will send the document in real time (even if
Real Time TX is set to Off). If the memory is full, faxes from the scanner glass cannot be sent until you clear some of the memory.
•In Real Time Transmission, the automatic redial feature does not work when using the scanner glass.
a Press Fax.
b Load your document.
c Press d or c to display Real Time TX. Press Real Time TX.
d Press On.
22