PhotoCapture Center™: Printing photos from a memory card or USB Flash memory drive
l If you do not want to change additional
settings, press 
or OK. Press Start to print.
Print Date
You can print the date if it is already in the data on your photo. The date will be printed on the
a
b Put the memory card or USB Flash memory drive in the correct slot.
c
d Swipe left or right to display View Photos.
e Press View Photos. Press OK.
f Swipe left or right, or press d or c to display each photo. When the photo you want is displayed, press it and then press OK.
g h
i Swipe up or down, or press a or b to display Print Date.
j Press Print Date.
k Press On (or Off).
l If you do not want to change additional
settings, press 
or OK. Press Start to print.
NOTE
The DPOF setting on your camera must be turned off to use the Print Date feature.
Setting your changes as the new default
You can save the print settings you use most often by setting them as the default settings, such as Print Quality, Paper Type, Paper Size, Print Size,
Auto Correct, Brightness, Contrast, Color Enhance, Cropping, Borderless and Print Date. These settings will stay until you change them again.
a b
c
d Swipe left or right to display View Photos.
e Press View Photos. | 8 |
Press OK. |
|
f Swipe left or right, or press d or c to display each photo. When the photo you want is displayed, press it and then press OK.
g Press OK.
h Press Print Settings.
i Press your new setting.
Repeat this step for each setting you want to change.
j After changing the last setting, swipe up
or down, or press a or b to display Set New Default.
k
l The Touchscreen asks you to confirm the change to the new default settings. Press Yes to confirm.
m Press 
.
69 