4 To hang up, replace the handset.

If you try to use a One Touch location with no number stored in it, you hear a warning sound, and screen displays NOT ASSIGNED. The display returns to normal after 2 seconds.

Speed Dialling

1 Pick up the handset. —OR— Press Hook.

2 When you hear a dial tone, press Search/Speed Dial, press #, and then press the two-digit Speed Dial number. (See Storing Speed Dial Numbers, page 15.)

3 If you pressed Hook to dial the call, pick up the handset when the other party answers. (The speaker works only one way; the other party won’t be able to hear you unless you pick up the handset.)

4 To hang up, replace the handset.

If you are sending a fax, press Fax Start after pressing the Speed Dial number. If you picked up the handset, press Fax Start when the receiving fax machine answers with fax tone.

Hold

1 Press Hold to put a call on Hold.

2 You can put down the handset without disconnecting the call.

3 Pick up the FAX/MFC handset to release the call from hold. Picking up an extension handset will not release the call from Hold.

Pause

Press Redial/Pause to insert a 3.5 second pause between numbers. If you are dialing overseas, you can press Redial/Pause as many times as needed to increase the length of the pause.

On Hook Dialling

1 Dial the number by using the dial pad or One Touch Dial key (FAX 2850), or Speed Dial and # then two-digit Speed Dial number.

2 The number you are dialling, or the name you have stored for One Touch or Speed Dial is displayed on the LCD.

3 Press Fax Start.

4 Pick up the handset when you hear the other end from the monitor speaker.

When you make a call by pressing Fax Start after dialling, you can listen to the other end of the line from the monitor speaker, but they can’t hear you unless you pick up the handset.

If you accidentally press Hook before lifting the handset, the call will be disconnected.

USE FAX BASIC

Telephone (Voice) Operation 26