Programming your pager number
When Paging is selected, your MFC dials the pager number you’ve programmed, and then dials your Personal Identification Number (PIN). This activates your pager so you will know that you have a fax message in the memory.
1 | Press Menu, 2, 5, 1. | 25.Remote Fax Opt | |||
2 | Press | or | to select | ▲ | 1.Fax Fwd/Paging |
| Paging. |
|
| Off | |
|
|
| ▼ | Fax Forward | |
| Press Set. |
|
| Select ▲▼ & Set | |
3 Enter your pager phone number followed by # # (up to 20 digits). Press Set.
Do not include the area code if it is the same as that of your MFC. For example, press 1 8 0 0 5 5 5 1 2 1 2 # #.
4 If your pager needs a PIN, enter the PIN, press #, press Redial/Pause,
enter your fax number followed by # #. Press Set.
(For example, press 1 2 3 4 5 # Redial/Pause 1 8 0 0 5 5 5 1 2 1 2 # #)
— OR—
If you do not need a PIN, press Redial/Pause, enter your fax number followed by # #.
Press Set.
(For example, press Redial/Pause 1 8 0 0 5 5 5 1 2 1 2 # #)
5 Press Stop/Exit.
You cannot change a Paging number or PIN remotely.
8 - 2 REMOTE FAX OPTIONS