Setting the Tray Use for Fax mode
If your MFC doesn’t have the optional tray #2, you can skip this setting.
The default setting of Auto allows your MFC to choose the optional Tray #2 if Tray #1 is out of paper or if incoming faxes will fit best on the paper in Tray #2.
1 | Press Menu, 1, 8. | 18.Tray Use: Fax | |||
2 | Press | or | toselectTray#1 | ▲ | Tray#1 Only |
| Only, Tray#2 Only, or Auto. |
| Tray#2 Only | ||
3 | ▼ | Auto | |||
Press Set. |
|
| Select ▲▼ & Set | ||
4 | Press Stop/Exit. |
|
|
|
If Auto Reduction is turned on, incoming faxes will be printed from the tray that is set for Auto Reduction. (See Printing a reduced incoming fax (Auto Reduction) on page
Setting the LCD Contrast
You can change the contrast to help the LCD look lighter or darker.
1
2
19.LCD Contrast | |||
Press Menu, 1, 7. | - |
| + |
| |||
| |||
| |||
|
|
| |
Press Menu, 1, 8. | Select |
| & Set |
|
|
|
If you have the optional tray #2, press Menu, 1, 9. Press to increase the contrast.
Press to decrease the contrast. Press Set.
3 Press Stop/Exit.
4 - 12 GETTING STARTED