Setting up Polled Transmission
Polled Transmission is when you set up your MFC to wait with a paper original so another fax machine can call and retrieve it.
1 If it is not illuminated in green, press (Fax). Place the
original that is going to be retrieved face up in the ADF, or face down on the scanner glass.
2 | Press Menu, 2, 2, 6. | 22.Setup Send | |||
3 | Press | or | to choose On | ▲ | 6.Polled TX |
| (or Off). |
|
| On | |
|
|
| ▼ | Off | |
| Press Set. |
|
|
| |
4 |
|
| Select ▲▼ & Set | ||
Press 1 if you want to choose more |
|
|
settings and the LCD will return to the Setup Send menu.
Press 2 if you have finished choosing settings, and go to step 5.
5 Press Start. The MFC starts scanning the document.
6 If you place the original in the ADF, wait for the fax to be polled.
If you are using the scanner glass, go to Step 7.
7 To send a single page, press 2 (or press Start again), wait for the fax to be polled.
To send more than one page, press 1 and go to Step 8.
8 Place the next page on the scanner glass. Press Set.
The MFC starts scanning and returns to Step 7. (Repeat Step 7 and 8 for each additional page).
The document will be stored and can be retrieved from any other fax machine until you delete the fax in memory by using the Cancelling a Job function. (See Canceling a scheduled job on page
SETUP SEND 6 - 21