IBM manual Error code, Description, Action, IBM System x3500 Type 7977 Installation Guide

vFollow the suggested actions in the order in which they are listed in the Action column until the problem is solved.

vSee the Problem Determination and Service Guide on the IBM System x Documentation CD to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU).

vIf an action step is preceded by “(Trained service technician only),” that step must be performed only by a trained service technician.

Error code	Description	Action
1801	A PCI adapter has requested memory	1.	Make sure that no devices have been disabled in
	resources that are not available.
			the Configuration/Setup Utility program.
		2.	Change the order of the adapters in the PCI-X
			slots. Make sure that the boot device is
			positioned early in the scan order (see the User’s
			Guide for information about the scan order).
		3.	Make sure that the settings for the adapter and all
			other adapters in the Configuration/Setup Utility
			program are correct. If the memory resource
			settings are not correct, change them.
		4.	If all memory resources are being used, remove
			an adapter to make memory available to the
			adapter. Disabling the BIOS on the adapter
			should correct the error. See the documentation
			that comes with the adapter.
1802	No more I/O space is available for a PCI	1.	Make sure that the settings for the adapter and all
	adapter.
			other adapters in the Configuration/Setup Utility
			program are correct.
		2.	If the error code indicates a particular PCI or
			PCI-X slot or device, remove that device.
		3.	Reseat each adapter
		4.	Replace the following components one at a time,
			in the order shown, restarting the server each
			time:
			a.	Each adapter
			b. (Trained service technician only) PCI-X board
1803	No more memory (above 1 MB for a PCI	1.	Make sure that the settings for the adapter and all
	adapter).
			other adapters in the Configuration/Setup Utility
			program are correct.
		2.	If the error code indicates a particular PCI or
			PCI-X slot or device, remove that device.
		3.	Reseat each adapter
		4.	Replace the following components one at a time,
			in the order shown, restarting the server each
			time:
			a.	Each adapter
			b. (Trained service technician only) PCI-X board

72IBM System x3500 Type 7977: Installation Guide