Heatsink 2

Microprocessor

Microprocessor 2

release lever

 

Microprocessor 2

VRM

6.Install the VRM.

7.Install the microprocessor:

a.Touch the static-protective package that contains the new microprocessor to any unpainted metal surface on the server; then, remove the microprocessor from the package.

b.Release the microprocessor retention latch by pressing down on the end, moving it to the side, and slowly releasing it to the open (up) position.

Microprocessor release lever (fully open)

Microprocessor bracket frame

c.Close the microprocessor bracket frame; then, close the microprocessor retention latch and lock it securely in place.

d. Close the microprocessor-release lever to secure the microprocessor.

8.Open the heat-sink release lever and install a heat sink on the microprocessor with the thermal grease side down; then, close the release lever.

26IBM System x3500 Type 7977: Installation Guide

Page 40
Image 40
IBM Type 7977 manual Vrm