
Remote Supervisor II
SlimLine adapter
Remote Supervisor II
SlimLine adapter retainer clip
Remote Supervisor II
SlimLine adapter support bracket
6.Carefully grasp the Remote Supervisor Adapter II SlimLine by its top edge or upper corners, and align it with the Remote Supervisor Adapter II SlimLine guide and the connector on the system board.
Attention: Incomplete insertion might cause damage to the system board or the adapter.
7.Press the Remote Supervisor Adapter II SlimLine firmly into the connector and under the retention clip on the Remote Supervisor Adapter II SlimLine support bracket.
8.Close the rear adapter retention bracket.
If you have other devices to install or remove, do so now. Otherwise, go to “Completing the installation.”
Completing the installation
To complete the installation, complete the following steps:
1.Install the bezel:
a.Align the tabs on the
b.Insert the tabs into the slots and close the bezel.
2.Install the