Statement 17:

CAUTION:

The following label indicates moving parts nearby.

4.Remove the power supply and power-supply filler from the server by pressing down on the release latch while you pull out on the plastic handle.

Note: The power supply, power-supply filler, or power supplies must be removed before you attempt to rotate the power-supply cage out of the way.

Power-supply

cage handle

Power-supply cage assembly

5.Lift the power-supply cage handle on the rear of the power supply cage, and rotate the power-supply cage out of the way until it latches in place. Let the power-supply cage rest on the rear power-supply structure support bracket.

Attention: To avoid breaking the retaining clips or damaging the DIMM connectors, open and close the clips gently.

6.Install the DIMMs into DIMM connectors:

Chapter 2. Installing optional devices 17

Page 31
Image 31
IBM Type 7977 manual Statement Following label indicates moving parts nearby