6 Press Start to send the fax from the ADF. The MFC starts scanning the first page.
If you are using the scanner glass, go to Step 7.
7 To send a single page, press 2 (or press Start again). The MFC starts sending the original.
To send more than one page, press 1 and go to Step 8.
8 Place the next page on the scanner glass. Press Set.
The MFC starts scanning and returns to Step 7. (Repeat Step 7 and 8 for each additional page).
Fax Resolution
When you have an original in the ADF or on the scanner glass you can use the Resolution key to change the setting temporarily (for
this fax only). If it is not illuminated in green, press 
(Fax). Press Resolution repeatedly until the LCD shows the setting you want.
You can change the default setting.
1 If it is not illuminated in green, press 2 Press Menu, 2, 2, 2.
3 Press 
or 
to select the resolution you want.
Press Set.
(Fax).
22.Setup Send 2.Fax Resolution
▲Standard
▼ Fine Select ▲▼ & Set
4 Press Stop/Exit.
Standard: Suitable for most typed originals.
Fine: Good for small print and transmits a little slower than Standard resolution.
S.Fine: Good for small print or artwork and transmits slower than Fine resolution.
Photo: Use when the original has varying shades of gray. This has the slowest transmission time.
SETUP SEND 6 - 7