Reinforcement Stitching 113

3

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Reinforcement Stitching
Reinforce points that will be subject to strain, such as sleeve holes, inseams and pocket corners.

Triple stretch stitching

Use triple stretch stitching to reinforce sleeve holes
and inseams.
aAttach zigzag foot “J”.
• For details, refer to “Replacing the presser
foot” (page 44).
bSelect stitch 4 .
• For details, refer to “Selecting stitching” (page
51).
cStart sewing.
• For details, refer to “Starting to sew” (page
53).

Bar tack stitching

Bar tacks are used to reinforce points subject to
strain, such as pocket corners and openings.
As an example, the procedure for sewing bar tacks a t
pocket corners is described below.
aDetermine the desired length of the bar tack.
Set the button guide plate on buttonhole foot
“A” to the desired length. (The distance
between the markings on the presser foot scale
is 5 mm (3/16 inch).)
aPresser foot scale
bLength of bar tack
c5 mm (3/16 inch)
• A bar tack with a maximum length of about
28 mm (1–1/8 inches) can be sewn.
Stitch Name Pattern Application
Stitch Width
[mm (inch)] Stitch Length
[mm (inch)] Presser
Foot
Auto Manual Auto Manual
Triple stretch
stitch
4Reinforcing the seams of sleeves
and inseams 0.0
(0) 0.0–7.0
(0–1/4) 2.5
(3/32) 1.5–4.0
(1/16–3/16) J
Bar tack
stitch
60 Reinforcing the ends of
openings, such as the corners of
pockets
2.0
(1/16) 1.0–3.0
(1/16–1/8) 0.4
(1/64) 0.3–1.0
(1/64–1/16)
A
Darning
stitch
58 Darning mediumweight fabrics 7.0
(1/4) 2.5–7.0
(3/32–1/4) 2.0
(1/16) 0.4–2.5
(1/64–3/32)
59 Darning thick fabrics 7.0
(1/4) 2.5–7.0
(3/32–1/4) 2.0
(1/16) 0.4–2.5
(1/64–3/32)
J
3
1
2