Reinforcement Stitching 115

3

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Darning
Fabric that has been torn can be darned.
Darning is sewn as shown below.
aReinforcement stitching
aDetermine the desired length of the darning.
Set the button guide plate on buttonhole foot
“A” to the desired length. (The distance
between the markings on the presser foot scale
is 5 mm (3/16 inch).)
aPresser foot scale
bLength of darning
c5 mm (3/16 inch)
d7 mm (1/4 inch)
• A bar tack with a maximum length of about
28 mm (1-1/8 inches) can be sewn.
bAttach buttonhole foot “A”.
• For details, refer to “Replacing the presser
foot” (page 44).
cSelect stitch 58 or 59 .
• For details, refer to “Selecting stitching” (page
51).
dPosition the fabric so that the needle is 2 mm
(1/16 inch) in front of the area to be darned,
and then lower the presser foot lever.
aTear
b2 mm (1/16 inch)
1
1
1
2
4
3
2
1