Brother NX 400 manual Threading the needle, 3Lower the presser foot lever

Threading the needle

The needle threader can be used with needle size 75/11 through 100/16. For more details on the needle, refer to “Needle types and their uses” (page 33).

1With your left hand, hold the end of the thread passed through the needle bar thread hook, and then pass the thread through the thread guide discs from the front.

1

2

3

1Thread guide discs

2 Pass to the back.

3 Pass through the slit.

2Cut the thread with the cutter on the left side of the machine.

1

1Thread cutter

3Lower the presser foot lever.

1

1Presser foot lever

XThe presser foot is lowered.

4Lower the needle threader lever until it clicks.

1

1Needle threader lever

XThe thread is passed through the eye of the needle.

5Release the needle threader lever.

6Carefully pull on the loop of thread passed through the eye of the needle to pull out the end of the thread.

CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX

INDEX

Upper Threading 27