Brother NX 400 manual Overcasting Stitches, Sewing overcasting stitches using overcasting foot G

UTILITY STITCHES ——————————————————————————————————————————————————

Overcasting Stitches

Sew overcasting stitches along the edges of cut fabric to prevent them from fraying. Fifteen stitches are available for overcasting. The procedure for sewing overcasting stitch is explained according to the presser foot that is used.

Sewing overcasting stitches using overcasting foot “G”

Three stitches can be used to sew overcasting with overcasting foot “G”.

		Stitch		Stitch Width		Stitch Length		Presser
Stitch Name	Pattern		Application	[mm (inch.)]		[mm (inch.)]
		Key						Foot
				Auto	Manual	Auto	Manual
	11		Preventing fraying in medium	3.5	2.5–5.0	2.0	1.0–4.0
			weight and thin fabrics	(1/8)	(3/32–3/16)	(1/16)	(1/16–3/16)
Overcasting	12			5.0	2.5–5.0	2.5	1.0–4.0	G
stitch			Preventing fraying in thick	(3/16)	(3/32–3/16)	(3/32)	(1/16–3/16)
			fabrics and fabrics that fray
	13
		–	easily	5.0	3.5–5.0	2.5	1.0–4.0
				(3/16)	(1/8–3/16)	(3/32)	(1/16–3/16)

CONTENTS GETTING READY SEWING

1Attach overcasting foot “G”.

G

•For details, refer to “Replacing the presser foot” (page 37).

2Select a stitch.

•For details, refer to “Selecting stitching” (page 68).

3Position the fabric with the edge of the fabric against the guide of the presser foot, and then lower the presser foot lever.

4Sew with the edge of the fabric against the presser foot guide.

1

1Needle drop point

CAUTION

●After adjusting the stitch width, slowly turn the balance wheel toward you and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break.

BASICS UTILITY STITCHES APPENDIX

1

1Guide

INDEX

70